UTEP

Spicer PS110-7A Manual Transmisssion, Fabco TC-270, 2-Speed Transfer Case, 254" W.B., 186" C.A., 97" A.F., 58,000 LBS GVRW, 18,000 LBS Front Axle Rating, 40,000 LBS Tandem Rear Axle, Ross TAS-65 Power Steering, Dual Air Brake System, 50 Gallon Step Fuel Tank, Full Instrumentation, Engine Block Heater, Badger Low Cab, Bostrom Air Driver Seat, Travel Height: 13'-4", Overall Length: 40'-8", Vehicle Weight: 48,300 LBS, Front Axle Weight: 16,300 LBS, Rear Axle Weight: 32,000 LBS
Tower Specifications:
MAT-3 BIGLIFT BL95-I, Insulated, Articulated Aerial Lift, 95 Ft. Maximum Working Height, 43 Ft. Maximum Side Reach, 16 Ft. Telescopic Lower Boom, 1000 LBS Platform Capacity, ANSI Category "B" Insulated, 69 KV Qualified Insulation, Power Assist Hydraulic Controls, Hydraulic Master/Slave Leveling, Hydraulic Platform Dump, Four Swing-Down Outriggers, 55 Gallon Hydraulic Reservoir, Press.Comp. Vari-Disp. Piston Pump, 1750 PSI Operating Pressure, 25 GPM Flow, Optional Equipment: 18 HP Gasoline Engine, Back-Up Hydraulic Power Unit, 10 GPM @ 1750 PSI

  VIN 1GBKC34J6VJ510919
Has Been Inspected and Parts Replaced, Operational, PM Performed and Parts Updated.
Chassis Specifications:
7.4L V8 MPI HO Gas Engine, Dual Fuel System: Gasoline/LP Gas, 4 Speed w/OD Automatic Transmission, 159.5" W.B., 84" C.A., 15,000 LBS GVRW, 5,000 LBS Front Axle Rating, 11,000 LBS Rear Axle Rating, Power Steering & Brakes, Air Conditioning, Full Instrumentation, AM/FM Radio, Fibre Body: 11 Ft. Fiberglass Utility Body, Pintle/Ball Hitch 16,000 LBS Rating, Strobe Lights, Remote Control Work Lights, Travel Height: 10'-2", Overall Length: 23'-6", Vehicle Weight: 13,880 LBS, Front Axle Weight: 4,480 LBS, Rear Axle Weight: 9,400 LBS
Tower Specifications:
Versalift Model SST-36I, Insulated, Articulated Aerial Lift, 41'-0" Maximum Working Height, 27'-8" Maximum Side Reach, 9'-8" Telescopic Upper Boom, 300 LBS Platform Capacity, 24"x24"x42" Fiberglass Bucket, ANSI Category "C" Insulated, 46 KV Qualified Insulation, Single Stick Platform Control, Hydraulic Master/Slave Leveling, Hydraulic Platform Dump, Two Remote Outriggers, 15 Gallon Hydraulic Reservoir, 2250 PSI Operating Pressure, 0.93 cu.in. Belt Driven Clutch Pump, Open Center Hydraulic System,
Optional Equipment: Venturo ET10KX 3200# Crane, 110 VAC Generator & Outlets, Two Speed Throttle Control, Remote Stop/Start

AC, 6-Compact Disc Changer, Cassette Deck, AM/FM ,Power Windows, Sun Roof, (missing back wiper)

RUNS VERY WELL

Teco Vanguard Aerial Tower, Model: V5-50IP-4TFEZ, SN: 58309407,
50Ft. Maximum Platform Height, 700 LBS Platform Capacity, 69 KVAC Rated
Inspected and Operational, Good Condition. PM Performed And Parts Updated.

.

Solid Tires, Low Usage, Very Well Maintained.

.

.

COMPLETELY REFURBISHED AND REBUILT IN 2012!

SN: 264083, 3-Phase, w/Bridgeport 8F Power Feed, 4Ft.x9" T-Slotted Table w/Collets 1/8-3/4"
Excellent Condition! Rebuilt and Added Digital Read Out In 2012. Used Only For One Offs, No Production.

w/20"x24" Adjustable Table, SN: 951-00663-80
80" x 3FT. x 7FT.Footprint
Excellent Condition.
Rebuilt in 2009.
Now Has Less then 10 Hrs.

.

degree, 11" Round at 90 Degree, 14" Flat at 90 Degree.
Excellent Condition! (Non Productive Use)

.

.

.

.

.

.

.

.

.

Very Good Condition!
Rebuilt in 2012.
Never Used In Production.
One Off's Only Very Low Hours.

{Has Transmission Leak}

.

.

.

.

.

EXCELLENT CONDITION.
LOW USAGE.

.

.

.

.

.

.

.

.

.

.

.

.